How to relocate a upright piano

Pianos regularly make movers annual list of products that are most regularly harmed. Grand pianos are especially troublesome. Practicing the following treatments for dismantling, padding and loading grand pianos will prevent damage, lower claims expense, and improve client fulfillment.

1) At least 3 individuals are needed to handle an infant grand piano. If the infant grand piano requires to increase or down stairs or if a full or show grand piano needs to be transferred, a minimum of 4 individuals are needed.

2) Always complete a thorough and accurate inventory. It may be more suitable or needed to use a visual stock to adequately describe and reveal pre-existing damage.

3) As different parts are taken apart, please place all hardware in an appropriately labeled parts bag and then position the parts bag in a "Components Box".

4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.

5) Detach the lid by getting rid of the hinge pins. Wrap the lid in a tidy furnishings pad.

6) Remove the prop that holds the cover open and cover it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.

7) Remove the pedal assembly and cover it in a tidy furniture pad. When getting rid of the screws, please be careful not to drop the braces. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the suitable number on each rod.

8) Pad the piano by putting a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you manage the piano. Cover the top of the piano with 2 tidy furniture pads, neatly folded around the keyboard. Usage elastic band to protect the pads. Note: Please ensure that the surface area of the piano is dust-free prior to padding it. Padding a highly polished surface area that is dirty might cause great scratches, specifically on a black lacquer finish.

9) Position a piano board and connect the straps so that it is all set to receive the piano. The raised brace on the piano board should be at the keyboard end of the piano.

10) Remove the left front leg by positioning one person beneath the piano at the left end of the keyboard. Be sure to have two individuals raising the corner of the piano while the 3rd individual removes the leg. Note: Please be sure to note which legs were removed from which positions since some pianos have legs that are not interchangeable.

11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please make sure to lift the entire piano somewhat while completing this maneuver to prevent excessive pressure on the staying, connected legs as the piano ideas. Lift the piano to an upright position on the board. Keep in mind: Please make sure that the soundboard is safe and secure prior to lifting. Be sure that the piano is focused comfortably against the brace at the end of the piano board. Note: Never leave the piano unattended. Constantly have at least someone holding the piano consistent at all times.

12) Eliminate the two staying legs and cover them in clean furnishings pads. These legs are held in place by a "crucial and slot" arrangement. To get rid of the leg, slide it inward toward the center of the piano up until it comes out of the slot.

13) Secure the piano to the piano board by bringing the Visit Website ends of the straps together and attaching them. Place folded burlap pads over the furnishings pads but under the straps to supply additional security to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.

14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for protection against home damage, position the keyboard end of the piano towards the bottom of the stairs. Attach a hump strap to the top end of the piano board to prevent the piano from slipping.

16) To fill the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The best place to pack the padded cover is between the piano and the preceding tier original site or between the piano and the wall.

Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing good sense and practicing the treatments noted above.

Leave a Reply

Your email address will not be published. Required fields are marked *